The Ergotorque 1/2 20-200 Nm torque wrench is at the exceptional price of €104.50 incl. tax until February 28!
The advantages of the Ergotorque dynamo wrench:
A NEW RATCHET HEAD:
Its polished finish ratchet head is equipped with a very robust 60-tooth mechanism that can operate both left and right by reversing the drive wheel. The ball bearing trigger mechanism guarantees high precision and ensures reliable operation for a long time. The torque pre-adjustment system is locked by pressing the adjustment wheel. When the tightening torque is reached, a clear and audible signal is heard. This key model has a quick change of direction of the square, for that it is enough to push the square.
ACCURACY AND READABILITY:
The micrometric graduation system of the torque wrench allows very precise adjustment thanks to a graduation ranging from 1 Nm for an exact measurement. Also, its graduation window has a magnifying glass for perfect readability of the double graduation in Nm or lbf.ft. The adjustment is thus more precise.
EASE OF USE :
Thanks to its adjustment and locking button which ensures safe and precise use, the Ergotorque torque wrench avoids any untimely adjustments when handling the handle: 1/ Pull the button to unlock, 2/ Adjust the desired tightening torque, 3/ Push the button back to lock.
ERGONOMICS AND SOLIDITY:
Its Bi-component handle ensures an obvious and ergonomic grip. Also, the surface of the steel handle of the Ergotorque dynamo wrench is protected by a copper coating and then an epoxy paint. This treatment provides perfect anti-corrosion protection and extends the life of your dynamo wrench. This Ergotorque torque wrench guarantees you for a minimum of 5,000 tightenings.
TRACEABILITY AND CERTIFICATION:
Each torque wrench comes with its unique serial number engraved on the handle. This guarantees the traceability of each key. All Ergotorque torque wrenches are delivered with a calibration certificate meeting the DIN EN ISO 6789 standard which certifies an accuracy of plus or minus 3%. In addition, at any time, you can have the calibration of your torque wrench checked. To do this, simply return your dynamo wrench to us with its certificate of origin (invoiced at €70.00 excluding VAT). IMPORTANT: on request, the DKD certificate (German equivalent of Cofrac) can be issued to you.
ADAPTABLE ON THE ERGOTORQUE DYNAMO WRENCH:
The Ergotorque torque wrench comes with a 1/2 square drive. If you wish, you can adapt the dynamo wrench to 3/8″ with the adaptable drive squares. Also, for even more ergonomics, the drive squares are available with a 1/2″ or 3/8″ T-handle.
#ergotorque #key #dynamqiue #promo #millmatpro