Breaking news

[New from Millmatpro is the Seld Mecatech range of high performance lubricants, additives and greases.

Find out more about the grease range available in 400g cartridges, 1kg boxes, 5kg buckets and 25 or 50kg drums

————————————————————————-

GREASE S4 Evolution LITHIUM EP2 HIGH PERFORMANCE GDA TECHNOLOGY WITH MODIFIED SILICONES – ANTI-WEAR - ANTI-FRICTION

CHARACTERISTICS

• Colour Light brown
• Consistency (NLGI grade) Grade 2 (ASTM 255/290
• Dropping point (NFT 60 102) 195° C
• Viscosity of water
• Oil viscosity at 40° C 180 mm²/s
• Operating temperatures -25° C / + 160° C
• Worker's loss (NFT 60 132) 10 000 strokes 10 (1/10 mm) 100 000 strokes 30 (1/10 mm)
• Maximum load 600 Kg/mm²
• Maximum speed (ndm factor) 250 000
• Washing 80 °C 1 Hour (NFT D1264) 3 %

USE

• All lubrication, even under heavy load, up to an operating temperature of 160° C, ball and roller bearings, low or high speeds, dry or wet environments
• S4 grease is used and appreciated in the following applications Public works, quarries, agriculture, automotive, marine, electric motors, pumps, fans.
• The S4 grease, grade 2, can be used in centralized installation or by manual lubrication. Due to its wide range of use and its high performance, the S4 grease can replace several greases, simplifying the maintenance of a fleet of equipment.

ADVANTAGES

• Due to its composition, HVI base doped with polymers/Lithium thickener and reinforced with modified silicones (GDA anti-wear/anti-friction technology), the S4 grease has exceptional lubricating power and offers performances that were until now reserved for a few very expensive special greases.
• The S4 grease gives better results than a conventional grease: significant reduction in wear and lower temperature of moving parts, smoother operation, significant increase in equipment service life.
• The affinity of modified silicones for metal surfaces also gives it exceptional anti-corrosion properties.
• Insoluble in fresh, salt, cold or boiling water.

————————————————————————-

GFS 5000 GREASE EXTREME PRESSURE GRADE 2 / COMPATIBLE CENTRAL LUBRICATION

FEATURES

• Yellow colour
• Lithium Complex Soap
• Dropping point >= 250° C
• Operating temperature -30 to 200° C
• Base oil viscosity (additivated) > 350 mm2/s
• Working penetration
• Worked penetration 60 strokes NFT 60-132 280-295
• Loss per 100,000 strokes of Worker NFT 60-132 35 with 10% water 45
• Water washout ASTM D1264 3%
• Starting torque at -25°C ASTM 1478 <2 daN
• Timken OK load >50 lb
• Shell 4 ball weld ASTM D2596 >= 250
• Shell 4 ball wear ASTM D2266 >0.5 mm
• Lifetime at 150 °C / 10 000 rpm 700 h
• Rustproofing EMCOR NFT 60-135 rating 0

USES

• Specially recommended for equipment subject to very high loads in wide temperature ranges.
• Approved by POMAGALSKI for the lubrication of slow moving and loaded bearings, such as those of extreme teleport and drag sheaves, and drag line sheaves, slow speed bearings and transmission cardan joints.
• Public works: Plain bearings, large bearings, heavily loaded gears
• Excellent mechanical stability, even in the presence of water.

ADVANTAGES

• The GFS 5000 grease has very high extreme pressure, corrosion and oxidation resistance properties. This grease is composed of a blend of highly refined synthetic oils and mineral bases, additivated with a package of viscosity improvers and modified silicones, thickened with a complex lithium soap.
• Lithium complex soap provides a very high melting point, as well as high water resistance.
• The blend of high viscosity base oils is further enhanced by a package of viscosity enhancers and modified silicones which give the GFS 5000 grease outstanding extreme pressure and load bearing properties. This enables performance that was previously reserved for a few very expensive special greases over a wide temperature range (equivalent base oil viscosity: more than 350 mm2/s at high shear and more than 460 mm2/s at std shear).
• The GFS5000 grease maintains an ideal consistency even at low temperatures, it does not harden and adheres to metal surfaces more strongly than a conventional grease: no splashing under the effect of shocks, smoother operation, significant increase in the service life of the equipment.
• The affinity of modified silicones for metal surfaces, combined with its high resistance to weathering, gives it excellent anti-corrosive properties.
• Due to its very low naphthenic oil content, GFS 5000 grease is hydrophobic and retains its properties (consistency, extreme pressure, anti-corrosion…) even in the presence of water.

————————————————————————-

S30 GREASE EXTREME PRESSURE LITHIUM ANTI-WEAR TECHNOLOGY – ANTI-FRICTION GDA

FEATURES

• Colour Light brown
• Consistency (NLGI grade) grade 0
• Dropping point 185° C
• Oil viscosity at 40° C 150 mm²/s
• Operating temperature -30° C / + 140° C
• Maximum load 600 Kg/mm²
• Maximum speed (ndm factor) 250 000
• Insoluble in fresh, salt, cold or boiling water

USE

• S 30 grease, grade 0, is particularly suitable for greasing in centralized installations or under sealed casings.
• All greasing operations, even under heavy load, up to an operating temperature of 160°C, at low or high speeds, in dry or damp environments.
• The S 30 grease is used and appreciated in the following applications: public works, quarries, agriculture, automotive, marine, electric motors, pumps, fans.
• Due to its wide range of use and high performance, S 30 grease can replace several greases, simplifying the maintenance of a fleet of equipment.

ADVANTAGES

• Due to its composition, a mineral base thickened with Lithium and reinforced with modified silicones (GDA technology), the S 30 grease has a very high lubricating power (extreme pressure lubrication) and offers performances that were until now reserved for a few very expensive special greases.
• The S 30 grease gives more satisfactory results than a conventional grease: significant reduction in wear and lowering of the temperature of moving parts, smoother operation, significant increase in the service life of equipment.
• The affinity of modified silicones for metal surfaces gives it exceptional anti-corrosive properties.
• Due to its Lithium thickened mineral base formulation, S 30 is compatible with all Lithium based greases. In most cases, disassembly and cleaning are not necessary, more frequent and larger top-ups are sufficient to displace the old grease.

————————————————————————-

GREASE S00 CENTRALIZED LUBRICATION EXTREME PRESSURE TECHNOLOGY GDA

FEATURES

• Colour Red
• Worked penetration NFT 60-132 1/10 mm of 431
• Drop point NFT 60-102 150
• Working temperature -35 to 100° C
• Shell 4 ball weld ASTM D2596 >= 200
• Shell 4 balls wear ASTM D2266 0.7 mm

USES

• Specially recommended for heavy duty equipment
• Excellent mechanical stability
• Excellent mechanical stability, even in the presence of water and at low temperatures.
• High lubricity and good corrosion resistance.
• Ensures good operation of centralized lubrication systems.

ADVANTAGES

• Synthetic grease based on calcium soap with anti-wear, extreme pressure and anti-rust properties. We are seeing more and more development of centralized lubrication systems on heavy goods vehicles and industrial installations that are designed for 00 grade soft greases.

————————————————————————-

URS GREASE POLYUREA / SEMI-SYNTHETIC BASE / MODIFIED SILICONES HIGH TEMPERATURE/ LONG LIFE

FEATURES

• Colour Pale Yellow
• Consistency (NL grade)
• Consistency (NLGI grade) 2
• Base oil viscosity (mm²/s – NFT60-100) 420
• Drop point (°C) >210 °C
• Operating temperature (°C) -30° C / + 200
• Maximum load (kg/mm²) 800
• Maximum speed (ndm factor) 300 000
• Penetration at -40°C (1/10 mm NFT60-171) 90
• Insoluble in cold or hot water

USE

• URS grease is a high performance grease which can be used in a wide temperature range from -30 to +200°C, from micro-bearings to the largest dimensions.
• URS grease is particularly suitable for very long greasing periods under heavy load up to an operating temperature of 200°C (above 160°C frequent lubrication is required).
• URS grease gives excellent results in the case of large clearances and on equipment subject to strong vibrations, due to its high stability.
• The URS grease, grade 2, can be used in centralized installations designed for this type of grease, in manual lubrication, but also in under-casing applications.
• Thanks to its wide range of use and its exceptional performance in terms of service life, the URS grease can replace several special greases, or allow a significant spacing of greasing, or even lifetime greasing, thus significantly reducing the maintenance cost of a fleet of equipment.
• Due to its polyurea based formulation, URS grease is not compatible with greases using other types of thickeners (Calcium Soaps, Lithium, Bentone…). It is therefore essential to carry out a complete disassembly and cleaning if one of these greases was previously used.

ADVANTAGES

• Due to its composition of semi-synthetic oils, polyurea thickener and GDA modified silicones, the URS grease offers exceptional load carrying, high temperature and service life properties, significantly reducing maintenance costs compared to a conventional grease.
• Its modified silicone formulation gives it very high lubricity (extreme pressure lubrication: GDA technology (anti-seize/anti-friction).
• The affinity of modified silicones for metal surfaces gives it exceptional anti-corrosion properties.
• URS grease retains a suitable consistency even under high mechanical stress (suitable up to a rotation factor of 300,000) and high temperature, it does not run, does not harden and adheres strongly to metal surfaces.